minimum order quantity for activewear, model wearing a printed legging and matching jacket from a small production run

Minimum order quantity for activewear: what MOQ really means for your first run

MOQ explained from the production side: per style, per color or per dye lot, why the mill sets the real limit, and six ways to place a smaller first order.

The minimum order quantity for activewear is the smallest number of pieces a factory is willing to make for you, and it normally applies per style, per color and per size range rather than to your whole order. Most of the time that number is set by the fabric mill and the dye house, not by the sewing line. That matters, because it tells you exactly which lever to pull when the number comes back too high. I ran my own sportswear brand PIXIE for 23 years with in-house design and production, and I have quoted, cut and re-ordered more fabric than I can count.

You know the moment. Your design is ready, your tech pack is done, you send a confident email to a factory. The reply says 500 pieces per color. You convert that to dollars and your stomach drops. An MOQ is not a law of nature. It is a calculation, and calculations can be changed.

What does MOQ actually mean?

MOQ stands for minimum order quantity. Read the exact wording a factory uses, because the wording is where your money sits. Four versions come up most often:

  • Per style. For example 300 pieces of your legging, in any color you like.
  • Per style per color. 300 black and 300 blue, so your order has just doubled.
  • Per fabric or per dye lot. The factory will sew what you ask, but the dye house only starts at a set number of yards.
  • Per order in value. Some factories work with a minimum dollar amount instead of a piece count.

So never ask only what their MOQ is. Ask whether it applies per style, per color or per size range, and ask for that answer in writing on the quote. That one follow up question can cut your first investment in half.

Why does a factory set a minimum order quantity for activewear?

Because the setup costs more time than the sewing does.

Before the first piece comes off the line, your pattern gets digitized and marked, the cutting table gets laid, and the machines get changed over with the right needle, the right thread and the right stitch for your fabric. A test piece gets sewn and measured. On stretch knits the coverstitch and the overlock have to be tuned by hand for your specific material, and a four way stretch behaves differently from a firm compression knit. All of that takes the same hours for 30 pieces as for 3,000. In our own production I saw it every day. The changeover was the real work. Once the machines were right, the sewing went quickly.

Why is the fabric usually the real limit?

This is the part you will not find on most websites, and it is the heart of the whole subject.

Performance fabric is knit on a machine nobody switches on for twenty yards. After knitting it gets dyed in a bath, per lot. A dye bath needs a minimum yardage or the recipe does not hold and your color drifts between rolls. So if you want your own color, you begin at the dye house minimum, and that number often sits well above the piece count your factory would happily sew.

That is why a factory can tell you two things in the same email: we can make 100 pieces for you, and you have to supply the fabric. Sewing capacity bends. The fabric chain does not.

What this means for your first order:

  • Stock fabric from a supplier’s shelf is sold by the yard, so the biggest hurdle disappears.
  • Your own color or your own print puts you straight at the minimums of the dye house or the print house.
  • A technical fabric with a coating or a special finish almost always carries higher minimums, because that treatment is applied per lot.

Building a first collection on stock fabric lets most brands start far smaller, and it says nothing bad about your quality. If you are still weighing up materials, start with choosing the right fabrics for sportswear.

How do you turn an MOQ into a number you can live with?

Before you react to the piece count, translate it into money and into time. Three calculations.

What do you pay up front? Pieces times your cost per piece. You usually pay that in two parts, a deposit at the order and the rest at delivery. That money sits in boxes until you sell.

How long are you holding it? Divide your quantity by what you realistically sell per month. Ten a month with 300 in stock means you are living with that color for two and a half years. Seasonal colors do not survive that.

What is left at the end? Assume you will not sell everything at full price. Some goes to sale, some stays. If your margin cannot carry that, the order is too big, however attractive the unit price looks. The U.S. Small Business Administration explains how inventory sits on your balance sheet, and it is worth reading before you sign anything.

A lower price per piece only pays off on the pieces you actually sell.

Six ways to start with a smaller run

These work in practice, in the order I see them succeed most often.

1. Limit your colors, not your sizes. One style in one color across a full size range is straightforward for a factory. The same style in four colors is four setups. Start with two colors and a size range that covers your customer.

2. Work with stock fabric. See above. This is the fastest win available to you.

3. Look for a smaller factory. Large factories carry large minimums because that is their business model. Smaller production units in Portugal, Poland, Turkey or the United States often start at much lower numbers. Your unit price goes up and your risk goes down.

4. Put several styles on the same fabric. Make your legging and your bra from the same knit and the yardage adds up until you reach the fabric minimum. Two styles, one fabric hurdle. This is the trick that gets overlooked most often.

5. Ask for a start up run. Plenty of smaller factories will make a first, smaller series against a surcharge, because they want you as a returning customer. Ask. The worst answer you get is no.

6. Sell first, produce second. A pre order takes the risk out. You know your quantity and you pay the factory with your customers’ money. This only works if you already have an audience, so it is not an escape route from a standing start.

What I would avoid is an order that only works if everything goes right. Run the numbers on half of it staying in the box, and see whether you still sleep at night.

When is a very low MOQ a warning sign?

A low number is not automatically good news.

If a supplier offers anything, from ten pieces, in any color, with your label inside, you are probably talking to a reseller or a print on demand service rather than a manufacturer. That can be useful for a test. It does mean you are putting your logo on someone else’s garment instead of building your own product. Read what print on demand really does for an activewear brand before you commit.

Three more signals worth noticing:

  • They do not want to see your tech pack. Someone who does not need your specifications will not follow your specifications.
  • No sample is made, or the sample is free. A proper sample costs time and therefore money. Going from sketch to samples is where your fit is decided.
  • You get no fabric name and no composition, only the words high quality. Ask for the composition, the weight in grams per square meter and a certificate such as OEKO-TEX STANDARD 100. Without those you cannot repeat your own product next season.

What I would order for a first run

Small enough to learn from, large enough to be taken seriously. One or two styles, two colors, stock fabric, a factory that takes small series. Your unit price will disappoint you. That is part of the deal, because in a first run you are not buying margin, you are buying answers: does it fit, does it sell, does your customer come back.

Once you have those answers, scaling up to a bigger order in your own color is a decision instead of a gamble.

Want the whole route, from design to your first production run, with the checklists I used in my own studio? That is what my Start Your Own Sportswear Brand training takes you through. If you would rather get an overview first, download the 10 steps to start your own sportswear brand guide.

What is a normal MOQ for a starting activewear brand?

There is no fixed number, and anyone promising you one is selling something. Smaller production units in Europe and the United States often start at a few dozen pieces per style, while large overseas factories usually begin at several hundred pieces per color. Always ask whether the number applies per style, per color or per size range.

Can I get below the minimum order quantity for activewear?

Often yes. The quickest routes are using stock fabric, limiting your number of colors, and putting several styles on the same knit so the yardage adds up. Asking a smaller factory for a start up run against a surcharge works regularly too.

Does the MOQ apply per color or to my whole order?

That depends on the producer, and it is the single most important question you can ask. At many factories it applies per style per color, because every color means a separate setup and often a separate dye lot. Get the answer in writing on your quote.

Should I buy the fabric myself?

Both routes work. If the factory supplies the fabric it is simpler, but you are tied to their range and their minimums. Buying it yourself gives you more choice and more control over quality, and you carry the risk of leftover yardage. For a first run, letting the factory supply the fabric is usually the calmer choice.

Share the Post: